Korrosol 1Litre

https://gpcustoms.co.uk/web/image/product.template/289/image_1920?unique=3ca1aca

Iron fallout remover for a clean and contaminant-free finish.

£ 14.99 14.99 GBP £ 14.99 VAT Included

£ 14.99 VAT Included

Not Available For Sale

  • Brand
  • Bottle Size

This combination does not exist.

Brand: Bilt Hamber
Bottle Size: 1Ltr


 

Description


A controlled pH non-alkaline fallout remover for the safe and effective removal of embedded metallic particles that contaminate the vast majority of road going vehicles.

You may not have noticed by looking at your paintwork, but next time it’s washed and clean lightly feel the paintwork, especially the horizontal panels; bonnet, boot lid, roof, etc. Very gently with finger tip touch you’ll be able to feel a rough grittiness. You may well think this is dust landed from the air – it’s not. Airborne metallic particles liberated by braking surfaces, such as pads and discs fill the air along our roads. When the car in front of you brakes, your car travels through these hot metalic particles and they are left embedded in your paintwork. Korrosol’s effective formula is simply sprayed onto the contaminated panel. A rapid and dramatic colour change takes place which indicates that the corroded part is water soluble after which a rinse with water leaves the panel free of metallic embedment. Korrosol is safe to use on all auto body paint finishes including lacquers.

Description

Synergy Lite V2 is a true 1-year ceramic coating that can be applied outside and is extremely forgiving in nature, which makes it the perfect choice for DIY application or for mobile valeters & detailers. Its 100ml glass bottle contains enough product to cover 5 vehicles making it one of the best value ceramic coatings available.Synergy Lite is made from the same polysilazane resin as our professional coatings, just with a lower ceramic content. This is combined with a trio of advanced solvents that allow the coating to be spread easily on a vehicle without the use of any oils. Finally, a polymer is added that bleeds through the ceramic and forms a top layer over the coating. This protects the vulnerable ceramic as it cures, and allows you to apply the coating to vehicles outdoors without causing failure. Lite is a true ceramic coating and when applied correctly and not washed for 7 days after application will reach 9H mohs hardness just like the longer term coatings. Synergy Lite is a last stage protection product and should only be applied after thoroughly washing, decontaminating, polishing (if required) Ceramic coatings only work if they bond correctly to the paint so ensuring you prepare the vehicle correctly is very important.